How to Extend the Lifespan of a Gas-Powered Forestry Log Splitter

1. Perform Regular Maintenance

   • Change the engine oil as recommended by the manufacturer (usually every 20–50 hours of use).

   • Check and replace the air filter regularly to ensure clean air intake.

   • Inspect the spark plug and fuel filter periodically for wear or clogging.

2. Use High-Quality Fuel and Oil

   • Always use fresh, clean gasoline log splitter(usually 87 octane or higher).

   • Avoid using fuel with high ethanol content, which may damage the engine over time.

   • Use manufacturer-recommended hydraulic oil and engine oil to reduce internal wear.

3. Clean After Every Use

   • Remove debris, bark, and wood chips from the machine, especially around the wedge and beam.

   • Wipe down exposed metal parts to prevent rust, especially if stored outdoors.

4. Inspect Hydraulic Components

   • Regularly check for hydraulic fluid leaks or pressure drops.

   • Clean the hydraulic cylinder and keep hoses in good condition to avoid bursts or cracks.

   • Replace hydraulic oil and filter according to the maintenance schedule.

5. Store Properly

   • Keep the splitter in a dry, sheltered area when not in use.

   • Cover the machine with a breathable cover to protect it from dust and moisture.

   • In winter or long-term storage, drain fuel or add stabilizer to prevent engine problems.

6. Operate Correctly

   • Always operate the splitter on a flat, stable surface.

   • Avoid overloading the machine beyond its rated tonnage capacity.

   • Allow the engine to warm up before use, and never shut down immediately after heavy use—let it idle briefly.

7. Follow Manufacturer Guidelines

   • Read and follow the user manual closely, especially regarding lubrication, part replacement, and safety precautions.

   • Use only genuine or compatible replacement parts to avoid damage and voiding the warranty.